What are the commonly used stage lighting fixtures?
1. Spotlight: It is one of the most widely used main lamp types on stage lighting. At present, there are 1KW and 2KW in the market, and 2KW is the most widely used. The illumination light is concentrated, and the edge of the light spot profile is relatively clear, which can highlight a part, and can also enlarge an area of light spot lighting. As the main light source of the stage, it is often used in surface light, slap light, side light and other light positions.
2. Soft light: Soft and well-proportioned light, which can not only highlight a certain part, but also have no stiff light spots, which is convenient for several lights to connect. Common ones are 0.3KW, 1KW, 2KW, etc. It is mostly used for short-distance light positions such as column light and flowing light.
3. Backlight: It is a type of reflective lamp that is characterized by hard light quality, high illuminance, and long range. It is an economical and efficient strong light. The common ones are mainly 0.5KW, 1KW, 2KW, etc., with 2KW being the most used.
4. Astigmatism lamps: diffuse light, uniform, and large projection area, divided into sky-discharged astigmatism and ground-discharged astigmatism. Common ones include 0.5KW, 1KW, 1.25KW, 2KW, etc. They are mostly used for canopy illumination and can also be used for general lighting of theater rostrums.
5. Modeling lamp: The principle lies between the follow-up light and the spotlight, and it is a special lamp that is mainly used for the projection of characters and scenery.
6. Foot light (also known as strip light): The light is soft and the area is wide. It is mainly used for lighting and color setting to the middle scene and netscape, and can also assist surface lighting at the table mouth.
7. Beam lamp (also known as downlight): Currently widely used, such as PAR46, PAR64 and other models. It can be used for lighting characters and scenery in all directions, or it can be directly installed on the stage, exposed to the audience, forming a light array for stage decoration and lighting.
8. Projection slides (also known as projection slides) and canopy effect lights: can form an overall picture on the stage canopy, as well as various special effects, such as wind, rain, thunder, and electricity.
Water, fire, smoke, clouds, etc.
9. Computer light: This is a smart light county controlled by DMX512 or RS232 or PMX signal. Its light color, light spot and illuminance are better than the above conventional lamps. It is a kind of intelligent lamp developed in the year of litigation. It is often installed in the surface light, top light, stage back steps and other positions. The color, shape, diagram, etc. in operation can be programmed. Due to the different power sizes, it should be used differently on the stage. General low-power computer lights are only suitable for ballroom use.
On the stage, low-power computer light lines and light spots are often talked about by stage spotlights, return lights, etc., so special attention should be paid to the selection.
10. Follow-up light: It is a lamp for stage lighting. It is characterized by high brightness and the use of lens imaging, which can present clear light spots. By adjusting the focal length, it can also change the virtual and real light spots. There is a movable light bar, which can easily change colors, and the lamp body can operate freely.
The lighting effect of stage lighting
1. Chasing light: The so-called chasing light, this light source is used to track the performers and highlight the specific light of the characters on the stage. This kind of lighting is the pen of the stage.
2. Heaven and Earth Exhaust Light: This kind of light is mainly used for color transformation or lighting between canopies. It is formed by lighting fixtures that are input from above and below the canopy to the canopy.
3. Bridge light: This kind of light is mainly used to assist the column light, which is the light projected to the stage in front of the charging port.
4. Top light: This light source is a type of ordinary stage lighting that can enhance the illuminance of the stage and can be illuminated at fixed points.
5. Flowing light: This light is used to assist in bridge light preparation, to supplement other specific light on both sides of the stage and to supplement the light on both sides.
6. Foot light: It is mainly used to assist with surface lighting, and it has the effect of eliminating shadows.
7. Backlight: It is a kind of light projected from the opposite direction of the stage, which can enhance the transparency and three-dimensional effect.
8. Column light: It is a kind of light that is projected from both sides of the stage, which can enhance the sense of contour that highlights things.
English 
