![light3]( "light3")
Many families will encounter a variety of problems when purchasing home lighting, among which, for the convenience of home life and the matching of home light, the installation and layout of stair lighting is also indispensable. What kind of lamp is good for stairs? Indoor stair lights at home generally use embedded design. Let's take a look at what kind of lamp is better for stairs.
![light2]( "light2")
What kind of lights are installed on the indoor stairs at home?
Wall embedded stair light
If you want to add a surprise factor to your staircase design, you can choose this ladder lamp design, and this may be the easiest way to install lamps without much fuss. When installing lamps, consider the height and spacing. Different foot lamps have different light output methods and power. The specific height and spacing should be determined in the field test.
1. Pay attention to the lighting power should not be too high (usually LED 1 W is enough, at most 3 W);
2. The surface brightness of the lamp should not be too high (the surface light is soft, or there is no direct light in the field of view during normal activities).
3. Lamps should have no exposed light source, or use a soft and non-dazzling matte surface.
4. It is best to bring your own infrared sensing device.
5. For the transformation, since there are no wiring conditions, it is very convenient to use a night light that can be adsorbed on the wall and recharged.
![light1]( "light1")
Bottom recessed stair light
This is a very popular way of lighting stairs now. The LED light strip is embedded under the stair tread, which sees the light but not the cumbersome lamps, and has a very eye-catching visual effect. When used indoors, there is no need to add chandeliers and wall lamps on the ceiling of the stairs: if used outdoors, there is no need for special light distribution. When the LED light goes out, it is hidden, and when you turn it on at night or at any time, it will produce a stunning soft floating effect.
The construction and installation of this lighting method is not too difficult. The key is the accurate and patient construction personnel of the node sample.
Tips:
1. Note that the power of the lamp should not be too high (in the light strips visible on the market, the lower the power, the better):
2. The surface brightness of the lamp should not be too high (the surface light is soft, or there is no direct light in the field of view during normal activities).
3. The lamps should have no exposed light source, or a soft and non-dazzling matte surface should be used, or they should be well hidden during installation.
4. It is best to use the entire light strip, or it is seamlessly connected to avoid dark areas in the middle.
5. Automatic infrared sensor switch is difficult to achieve, and the cost performance is not high. Two-way switch can be used.
6. At present, there are no small products on the market that can be disassembled and recharged repeatedly. The line should be hidden during installation.
![light4]( "light4")
Have you ever heard of LED lights that can be automatically turned on by motion sensing? This light is the ladder step sensor light. This light uses "light sensing plus human body sensing". When the light is dim, the device will start, and the light will turn on when people come over. But human body sensing has defects, because most of the country now uses dynamic sensing, so if people stand still on the stairs, the light will go out after a period of time
The more popular one now is to use "delayed start plus gravity sensing", which is also a good design. Tips:
1. Be careful that the lamp power should not be too high.
2. The surface brightness of the lamp should not be too high (the surface light is soft, or there is no direct light in the field of view during normal activities).
3. The lamps should have no exposed light source, or a soft and non-dazzling matte surface should be used, or they should be well hidden during installation.
4. The automatic infrared sensor switch shall not be electrically wired when installed, and the load is strictly prohibited from short-circuiting.
5. Due to the large starting current of fluorescent lamps and energy-saving lamps, it is recommended that a switch control two or fewer loads.
6. Because a certain amount of heat is generated when the light is on, the installation distance between the human sensor switch and the light should be 1-2 meters away. If the human sensor switch is too close to the light, it will affect the human sensor switch, especially shortening the life of the human sensor switch.
![light5]( "light5")
English 
